Update README.md

-fix: wrong time

FHEM/71_XiaomiSmartHome.pm

@@ -41,15 +41,15 @@ return "\nERROR: Please install Crypt::CBC" if($@);
 eval "use Net::Ping";
 return "\nERROR: Please install Net::Ping" if($@);
 
+
 use Color;
 use SetExtensions;
 
-
-
-sub XiaomiSmartHome_Notify($$);
 sub XiaomiSmartHome_updateSingleReading($$);
 my $iv="\x17\x99\x6d\x09\x3d\x28\xdd\xb3\xba\x69\x5a\x2e\x6f\x58\x56\x2e";
-my $version = "1.08";
+
+my $version = "1.41";
+
 my %XiaomiSmartHome_gets = (
 	"getDevices"	=> ["get_id_list", '^.+get_id_list_ack' ],
 
@@ -64,6 +64,7 @@ my %sets = (
   "volume:slider,1,1,100" => 1,
   "ringtone:0,1,2,3,4,5,6,7,8,13,21,22,23,24,25,26,27,28,29,10000,10001" => 1,
   "ringvol" => 2,
+  "learn" => 0,
 );
 
 
@@ -72,7 +73,7 @@ my %sets = (
 sub XiaomiSmartHome_Initialize($) {
     my ($hash) = @_;
 
-	$hash->{Clients}    = "XiaomiSmartHome_Device";
+	$hash->{Clients}    = 'XiaomiSmartHome_Device';
     $hash->{DefFn}      = 'XiaomiSmartHome_Define';
     $hash->{UndefFn}    = 'XiaomiSmartHome_Undef';
 	$hash->{NotifyFn}   = 'XiaomiSmartHome_Notify';
@@ -80,15 +81,16 @@ sub XiaomiSmartHome_Initialize($) {
     $hash->{GetFn}      = 'XiaomiSmartHome_Get';
     $hash->{AttrFn}     = 'XiaomiSmartHome_Attr';
     $hash->{ReadFn}     = 'XiaomiSmartHome_Read';
-    $hash->{WriteFn}    = "XiaomiSmartHome_Write";
+	$hash->{ReadyFn}    = 'XiaomiSmartHome_Ready';
-	$hash->{AttrList}	= "disable:1,0 " .
+    $hash->{WriteFn}    = 'XiaomiSmartHome_Write';
+	$hash->{AttrList}	= 'disable:1,0 ' .
 						  $readingFnAttributes;
 
 	$hash->{MatchList} = { "1:XiaomiSmartHome_Device"   => ".*magnet.*",
 						"2:XiaomiSmartHome_Device"      => ".*motion.*",
 						"3:XiaomiSmartHome_Device"      => "^.+sensor_ht",
 						"4:XiaomiSmartHome_Device"      => ".*switch.*",
-						"5:XiaomiSmartHome_Device"      => "^.+cube",
+						"5:XiaomiSmartHome_Device"      => ".*cube.*",
 						"6:XiaomiSmartHome_Device"      => "^.+plug",
 						"7:XiaomiSmartHome_Device"      => "^.+86sw1",
 						"8:XiaomiSmartHome_Device"      => "^.+86sw2",
@@ -102,7 +104,12 @@ sub XiaomiSmartHome_Initialize($) {
 						"16:XiaomiSmartHome_Device"     => "^.+natgas",
 						"17:XiaomiSmartHome_Device"     => "^.+smoke",
 						"18:XiaomiSmartHome_Device"     => "^.+weather.v1",
-						"19:XiaomiSmartHome_Device"     => "^.+sensor_motion.aq2"};
+						"19:XiaomiSmartHome_Device"     => "^.+sensor_motion.aq2",
+						"20:XiaomiSmartHome_Device"     => "^.+sensor_wleak.aq1",
+						"21:XiaomiSmartHome_Device"     => "^.+vibration",
+						"22:XiaomiSmartHome_Device"     => "^.*b186acn01",
+						"23:XiaomiSmartHome_Device"     => "^.*b286acn01",
+						"24:XiaomiSmartHome_Device"     => "^.*b1acn01"};
 	FHEM_colorpickerInit();
 }
 #####################################
@@ -110,9 +117,12 @@ sub XiaomiSmartHome_Read($) {
     my ($hash) = @_;
     my $name = $hash->{NAME};
 	my $self = {}; # my new hash
-	my $new_hash = {};
 
 	Log3 $name, 5, "$name: Read> Read start";
+    if ( ! $hash->{SID} ){
+		Log3 $name, 3, "$name: Read> No SID, Stop Read";
+		return;
+	}
 	my $buf = "";
     my $ret = sysread($hash->{CD}, $buf, 1024);
     if (!defined($ret) || $ret <= 0)
@@ -134,21 +144,67 @@ sub XiaomiSmartHome_Read($) {
 	}
     if ($json)
     {
-        Log3 $name, 5, "$name: Read> " .  $buf;
+    Log3 $name, 5, "$name: Read> [PLAIN] " .  $buf;
 		my $rsid = $decoded->{'sid'};
 		if ($decoded->{'cmd'} eq 'read_ack' || $decoded->{'cmd'} eq 'report' && $decoded->{'model'} ne 'gateway'|| $decoded->{'cmd'} eq 'heartbeat' && $decoded->{'model'} ne 'gateway' || $decoded->{'cmd'} eq 'write_ack' && $decoded->{'model'} ne 'gateway') {
-			Log3 $name, 5, "$name: Read> Dispatch " . $buf;
+			# devices does not exist yet
-			Dispatch($hash, $buf, undef);
+			if (!$modules{XiaomiSmartHome_Device}{defptr}{$rsid}{IODev}->{NAME}){
+				Log3 $name, 5, "$name: Read> XiaomiSmartHome_Device unknown trying autocreate" ;
+				my $def=$modules{XiaomiSmartHome}{defptr};
+				while(my ($key, $value) =each(%$def)){
+					XiaomiSmartHome_Write($value, 'get_id_list');
+					Log3 $value->{NAME}, 5, "$value->{NAME}: Push to get all Sensors for Gateway $value->{NAME} " . $key;
+					if ($value->{helper}{sensors} =~ m/$rsid/ ) {
+						Log3 $value->{NAME}, 5, "$value->{NAME}: $rsid is sensor from $value->{NAME}";
+						Dispatch($value, $buf, undef);
+						return;
 						}
+				}
+			}
+			# devices available with proper and HEARTBEAT gw
+			elsif ($decoded->{'cmd'} eq 'heartbeat' && $modules{XiaomiSmartHome_Device}{defptr}{$rsid}{IODev}->{NAME} eq $hash->{NAME}) {
+				Log3 $name, 5, "$name: Read> Dispatching! " . "SID: " . $rsid . " " . $modules{XiaomiSmartHome_Device}{defptr}{$rsid}{IODev}->{NAME} . " " . $hash->{NAME};
+				Dispatch($hash, $buf, undef);
+				return;
+				}
+			elsif ($decoded->{'cmd'} eq 'report' && $modules{XiaomiSmartHome_Device}{defptr}{$rsid}{IODev}->{NAME} eq $hash->{NAME}) {
+				Log3 $name, 5, "$name: Read> Dispatching! " . "SID: " . $rsid . " " . $modules{XiaomiSmartHome_Device}{defptr}{$rsid}{IODev}->{NAME} . " " . $hash->{NAME};
+				Dispatch($hash, $buf, undef);
+				return;
+				}
+			# Senosoren check change to right GW
+			elsif ($decoded->{'cmd'} eq 'read_ack')  {	
+				$hash = $modules{XiaomiSmartHome_Device}{defptr}{$rsid}->{IODev};
+				Log3 $name, 4, "$name: Read> Dispatching using this GW " . $hash->{NAME} ;
+				Dispatch($hash, $buf, undef);
+				return;
+				}
+
+		}
+		# gateway sensor list
+		elsif ($decoded->{'cmd'} eq 'get_id_list_ack'){
+			$self = $modules{XiaomiSmartHome}{defptr}{$rsid};
+			Log3 $name, 5, "$name: Read> Reading Sensorlist with $self->{NAME}" ;
+			XiaomiSmartHome_Reading ($self, $buf);
+			return;
+			}
+		# gateway not definded
+		elsif (!$modules{XiaomiSmartHome}{defptr}{$rsid}){
+			Log3 $name, 1, "$name: Read> GW not defined " . $buf;
+			return;
+			}
+		# gateway defined but not the right modul instance - change
 		elsif ( $modules{XiaomiSmartHome}{defptr}{$rsid}->{SID} ne $hash->{SID} ){
 			$self = $modules{XiaomiSmartHome}{defptr}{$rsid};
-			Log3 $name, 5, "$name: Read> Change HASH Ref to $self->{NAME}";
+			Log3 $name, 5, "$name: Read> Wrong Modul HASH skipping $self->{NAME}";
-			XiaomiSmartHome_Reading ($self, $buf);
+			#XiaomiSmartHome_Reading ($self, $buf); no reading anymore!
+			return;
 			}
-		else
+		#gateway defined and the right modul instance - nothing to change
-			{
+		elsif ( $modules{XiaomiSmartHome}{defptr}{$rsid}->{SID} eq $hash->{SID} ){
 			Log3 $name, 5, "$name: Read> HASH correctly";
 			XiaomiSmartHome_Reading ($hash, $buf);
+			return;
 		}
 	 }
 }
@@ -199,7 +255,7 @@ sub XiaomiSmartHome_Reading ($@) {
 								#$hash->{SID} = $decoded->{'sid'};
 							}
 							else {
-								Log3 $name, 4, "$name: Reading> IP-Heartbeat Data didnt match! $data->{ip}  " . $hash->{GATEWAY_IP} ;
+								Log3 $name, 5, "$name: Reading> IP-Heartbeat Data didnt match! $data->{ip}  " . $hash->{GATEWAY_IP} ;
 							}
 						}
 					}
@@ -235,11 +291,14 @@ sub XiaomiSmartHome_Reading ($@) {
 					Log3 $name, 1, "$name: Reading> Error while request: $@";
 					return;
 				}
+			my $all_sensors = "";
 			foreach my $sensor (@sensors)
 				{
 				Log3 $name, 4, "$name: Reading> PushRead:" . $sensor;
 				XiaomiSmartHome_Write($hash, 'read',  $sensor );
+				$all_sensors = $all_sensors . $sensor . ",";
 				}
+			$hash->{helper}{sensors} = $all_sensors;
 			return;
 		}
 	}
@@ -286,14 +345,14 @@ sub XiaomiSmartHome_getGatewaySID($){
 			}
 			if ($json) {
 				if ($decoded->{'ip'} eq $ip){
-					Log3 $name, 4, "$name: getGatewaySID> Find SID for Gateway: $decoded->{sid}";
+					Log3 $name, 3, "$name: getGatewaySID> Find SID for Gateway: $decoded->{sid}";
 					$sidsock->close();
 					$hash->{SID} =  $decoded->{sid};
 					$modules{XiaomiSmartHome}{defptr}{$decoded->{sid}} = $hash;
 					return $decoded->{sid};
 					}
 				else {
-					Log3 $name, 4, "$name: getGatewaySID> whois Data didnt match! $decoded->{sid} $decoded->{'ip'} ". $ip ;
+					Log3 $name, 5, "$name: getGatewaySID> whois Data didnt match! $decoded->{sid} $decoded->{'ip'} ". $ip ;
 					}
 				}
 			};
@@ -326,7 +385,7 @@ sub XiaomiSmartHome_Define($$) {
 	if ( ! $p->ping($param[2])){
 		$hash->{STATE} = "Disconnected";
 		XiaomiSmartHome_disconnect($hash);
-		Log3 $name, 5, "$name: Define> Ping ERROR Gateway disconnecting";
+		Log3 $name, 1, "$name: Define> Ping ERROR Gateway disconnecting";
 		$p->close();
 	}
 	my $GATEWAY_IP = $param[2];
@@ -344,7 +403,7 @@ sub XiaomiSmartHome_Define($$) {
 		eval {
 			$GATEWAY_IP = inet_ntoa(inet_aton($hash->{GATEWAY})) ;
 			$hash->{GATEWAY_IP} = $GATEWAY_IP;
-			Log3 $name, 1, "$name: Define> Set GATEWAYs IP: " .  $GATEWAY_IP;
+			Log3 $name, 5, "$name: Define> Set GATEWAYs IP: " .  $GATEWAY_IP;
 			};
 		if ($@) {
 			Log3 $name, 1, "$name: Define> Error $@\n";
@@ -354,7 +413,7 @@ sub XiaomiSmartHome_Define($$) {
 			}
 	}
 	$hash->{GATEWAY_IP} = $GATEWAY_IP;
-	$modules{XiaomiSmartHome}{defptr}{$GATEWAY_IP} = $hash;
+	#$modules{XiaomiSmartHome}{defptr}{$GATEWAY_IP} = $hash;
 	#$hash->{SID} =  XiaomiSmartHome_getGatewaySID($hash);
 
 	Log3 $name, 5, "$name: Define> $definition";
@@ -383,7 +442,7 @@ sub XiaomiSmartHome_Write($@)
 	my ($hash,$cmd,$val,$iohash)  = @_;
     my $name = $hash->{NAME};
 	if ( $hash->{helper}{ConnectionState} eq 'Disconnected') {
-		Log3 $name, 1, "$name: Write> Cannot write iam disconnected";
+		Log3 $name, 1, "$name: Write> Cannot write iam Disconnected";
 		return undef;
 		}
 	else{
@@ -475,6 +534,11 @@ sub XiaomiSmartHome_Write($@)
 				{
 				$msg  = '{"cmd":"write","model":"curtain","sid":"' . $iohash->{SID} . '","data":"{\"curtain_level\":\"' . $val . '\",\"key\":\"'. XiaomiSmartHome_EncryptKey($hash) .'\"}" }';
 				}
+			if ($cmd eq 'learn')
+				{
+				my $t = '"yes"';
+				$msg  = '{"cmd":"write","model":"gateway","sid":"' . $hash->{SID} . '","data":"{\"join_permission\":' . $t . ',\"key\":\"'. XiaomiSmartHome_EncryptKey($hash) .'\"}" }';
+				}
 			}
 		}
 	return Log3 $name, 4, "$name: Write> - socket not connected" unless($hash->{CD});
@@ -482,7 +546,7 @@ sub XiaomiSmartHome_Write($@)
 	my $sock = $hash->{CD};
 	my $MAXLEN  = 1024;
 	$sock->mcast_send($msg,$GATEWAY .':9898') or die "send: $!";
-    Log3 $name, 5, "$name: Write> End " . $GATEWAY;
+    Log3 $name, 4, "$name: Write> End " . $GATEWAY;
     return undef;
 }
 #####################################
@@ -506,6 +570,22 @@ sub XiaomiSmartHome_EncryptKey($)
 }
 #####################################
 
+sub XiaomiSmartHome_Ready($)
+{
+	my ($hash) = @_;
+      
+	# Versuch eines Verbindungsaufbaus, sofern die Verbindung beendet ist.
+	return DevIo_OpenDev($hash, 1, undef ) if ( $hash->{helper}{ConnectionState} eq "Disconnected" );
+
+	# This is relevant for Windows/USB only
+	if(defined($hash->{USBDev})) {
+		my $po = $hash->{USBDev};
+		my ( $BlockingFlags, $InBytes, $OutBytes, $ErrorFlags ) = $po->status;
+		return ( $InBytes > 0 );
+	}
+}
+#####################################
+
 sub XiaomiSmartHome_Get($@)
 {
 	my ($hash , $name, $opt, $args ) = @_;
@@ -513,12 +593,14 @@ sub XiaomiSmartHome_Get($@)
 	if ($opt eq "UpdateAll")
 		{
 		XiaomiSmartHome_updateAllReadings($hash);
-		Log3 $name, 5, "$name: Get> UpdateALLReadings Started";
+		Log3 $name, 3, "$name: Get> UpdateALLReadings Started";
+		return "UpdateALLReadings Started";
 		}
 	elsif($opt eq "UpdateSingle")
 		{
 		XiaomiSmartHome_updateSingleReading($hash,$args);
-		Log3 $name, 5, "$name: Get> UpdateSingel Started";
+		Log3 $name, 3, "$name: Get> UpdateSingel Started";
+		return "UpdateSingel " . $args . " Started";
 		}
 	else
 	{
@@ -531,7 +613,18 @@ sub XiaomiSmartHome_Notify($$)
 {
  	my ($hash, $dev_hash) = @_;
 	my $ownName = $hash->{NAME}; # own name / hash
-	Log3 $ownName, 5, "$ownName: Notify> NotifyStart";
+	#my $evName = $dev_hash->{NAME}; # triggered device
+	#my $rsid = $dev_hash->{SID};
+	Log3 $ownName, 5, "$ownName: Notify> NotifyStart";# . $rsid . " " . $evName;
+	
+	# gateway defined but not the right modul instance
+	#if ( $modules{XiaomiSmartHome}{defptr}{$rsid}->{SID} ne $hash->{SID} ){
+	#	Log3 $ownName, 5, "$ownName: Notify> Wrong Event-Modul HASH skipping " . $evName;
+	#	#XiaomiSmartHome_Reading ($self, $buf);
+	#	return;
+	#}
+
+	
 	return "" if(IsDisabled($ownName)); # Return without any further action if the module is disabled
 	$attr{$hash->{NAME}}{webCmd} = "pct:rgb:rgb ff0000:rgb 00ff00:rgb 0000ff:on:off" if ( ! $attr{$hash->{NAME}}{webCmd} || $attr{$hash->{NAME}}{webCmd} eq "rgb:rgb ff0000:rgb 00ff00:rgb 0000ff:on:off" );
 	readingsSingleUpdate($hash, "pct", 100, 1) if ( ! $hash->{READINGS}{pct}{VAL});
@@ -620,6 +713,10 @@ sub XiaomiSmartHome_Set($@)
 			}
 		readingsEndUpdate( $hash, 1 );
 	}
+	elsif($cmd eq "learn")
+	{
+		XiaomiSmartHome_Write($hash,'learn', 1);
+	}
 	elsif($cmd eq "pct")
 	{
 		my $ownName = $hash->{NAME};
@@ -681,8 +778,6 @@ sub XiaomiSmartHome_connect($)
     my $name = $hash->{NAME};
 	my $GATEWAY_IP;
 	Log3 $name, 5, "$name: connect> ConnectStart";
-
-    Log3 $name, 4, "$name: connecting";
 	my $p = Net::Ping->new();
 	if ( ! $p->ping($hash->{GATEWAY})){
 		Log3 $name, 1, "$name: connect> Ping to $hash->{helper}{host} failed";
@@ -695,7 +790,7 @@ sub XiaomiSmartHome_connect($)
 		eval {
 			$GATEWAY_IP = inet_ntoa(inet_aton($hash->{GATEWAY})) ;
 			$hash->{GATEWAY_IP} = $GATEWAY_IP;
-			Log3 $name, 4, "$name: Connect> Set GATEWAYs IP: " .  $GATEWAY_IP;
+			Log3 $name, 5, "$name: Connect> Set GATEWAYs IP: " .  $GATEWAY_IP;
 			};
 		if ($@) {
 			Log3 $name, 1, "$name: Connect> Error $@\n";
@@ -706,12 +801,12 @@ sub XiaomiSmartHome_connect($)
 		}
     XiaomiSmartHome_getGatewaySID($hash);
 	my $timeout = $hash->{TIMEOUT} ? $hash->{TIMEOUT} : 3;
-	my $sock = IO::Socket::Multicast->new( Proto     => 'udp', LocalPort =>'9898', ReuseAddr => 1, Timeout => $timeout) or die "Creating socket: $!\n";
+	my $sock = IO::Socket::Multicast->new( Proto     => 'udp', LocalPort =>'9898', ReusePort => 1, ReuseAddr => 1, Timeout => $timeout) or die "Creating socket: $!\n";
 	$sock->setsockopt(SOL_SOCKET, SO_RCVTIMEO, pack('l!l!', 30, 0))   or die "setsockopt: $!";
 	if ($sock)
 	{
 		Log3 $name, 3, "$name: connect> Connected";
-		$sock->mcast_add('224.0.0.50', $hash->{fhemIP} ) || die "Couldn't set group: $!\n"; #$hash->{fhemIP}
+		$sock->mcast_add('224.0.0.50', $hash->{FHEMIP} ) || die "Couldn't set group: $!\n"; #$hash->{FHEMIP}
 		$sock->mcast_ttl(32);
 		$sock->mcast_loopback(1);
 		$hash->{helper}{ConnectionState} = "Connected";
@@ -748,7 +843,7 @@ sub XiaomiSmartHome_disconnect($)
     }
 
     return if (!$hash->{CD});
-    Log3 $name, 3, "$name: disconnect> disconnecting";
+    Log3 $name, 1, "$name: disconnect> disconnecting";
 
 	close($hash->{CD}) if($hash->{CD});
     delete($hash->{FD});
@@ -782,7 +877,7 @@ sub XiaomiSmartHome_updateAllReadings($)
 	my $GATEWAY;
 	my $p = Net::Ping->new();
 	if ( ! $p->ping($hash->{GATEWAY})){
-		Log3 $name, 4, "$name: updateAllReadings> Ping to $hash->{helper}{host} failed";
+		Log3 $name, 1, "$name: updateAllReadings> Ping to $hash->{helper}{host} failed";
 		$hash->{STATE} = "Disconnected";
 		XiaomiSmartHome_disconnect($hash);
 		$p->close();
@@ -872,20 +967,21 @@ sub XiaomiSmartHome_updateAllReadings($)
 		<li>ctrl_neutral2: Double bond ignition switch</li>
 		<li>rgbw_light: Smart lights (report only)</li>
 		<li>curtain: Curtain (Control only if device has reporte curtain_level)</li>
+		<li>water: water detector</li>
 		<li>smoke: smoke alarm detector</li>
 		<ul>
 			<li>0: disarm</li>
-			<li>1: arlarm</li>
+			<li>1: alarm</li>
-			<li>8: battery arlarm</li>
+			<li>8: battery alarm</li>
-			<li>64: arlarm sensitivity</li>
+			<li>64: alarm sensitivity</li>
 			<li>32768: ICC communication failure</li>
 		</ul>
 		<li>gas: gas alarm detector</li>
 		<ul>
 			<li>0: disarm</li>
-			<li>1: arlarm</li>
+			<li>1: alarm</li>
-			<li>2: analog arlarm</li>
+			<li>2: analog alarm</li>
-			<li>64: arlarm sensitivity</li>
+			<li>64: alarm sensitivity</li>
 			<li>32768: ICC communication failure</li>
 		</ul>
 	</ul>
@@ -902,9 +998,11 @@ sub XiaomiSmartHome_updateAllReadings($)
 		<li>password: without password no write to the gateway is possible. Use the MI APP to find the password</li>
 		<li>RGB(Colorpicker): set the color</li>
 		<li>PCT(Slider): set the brightness in percent</li>
+		<li>intervals: set the gateway to on for an time eg. set intervals 07:00-08:00</li>
 		<li>ringtone: set the ringtone 0-8,13,21-29,10001-.. | 10000 = off</li>
 		<li>volume: set the volume 1-100, (100 is very loud)</li>
 		<li>ringvol: set ringtone and volume in on step e.g. set [GWNAME] ringvol 21 10</li>
+		<li>learn: set the gateway in learningmode to learn new sensors now push the button from the new sensor</li>
 	</ul>
 	<br/>
 	<b>Set: Devices</b>
@@ -931,9 +1029,9 @@ sub XiaomiSmartHome_updateAllReadings($)
     <i>XiaomiSmartHome</i> Steuern des XiaomiSmartHome Gateway und deren verbundener Sensoren.
     <a name="XiaomiSmartHome"></a>
 	<br/>
-	<b>Vorraussetzungen</b>
+	<b>Voraussetzungen</b>
 	<ul>
-		<li>Diese Pakete m&uumlssen installiert sein: apt-get install libio-socket-multicast-perl libjson-perl libcrypt-cbc-perl</li>
+		<li>Diese Pakete m&uuml;ssen installiert sein: apt-get install libio-socket-multicast-perl libjson-perl libcrypt-cbc-perl</li>
 		<li>Und mit CPAN: cpan Crypt::Cipher::AES</li>
 	</ul>
 	<br/>
@@ -945,11 +1043,11 @@ sub XiaomiSmartHome_updateAllReadings($)
         <br><br>
     </ul>
 	<br/>
-	<b>Entwicklermodus am Gatway setzen!</b>
+	<b>Entwicklermodus am Gateway setzen!</b>
     <ul>
-		<p>Ohne Entwicklermodus ist keine Komunikation mit dem Gateway m&oumlglich.
+		<p>Ohne Entwicklermodus ist keine Kommunikation mit dem Gateway m&ouml;glich.
-		<br/>Zum setzen des Entwicklermoduses braucht man ein android oder ios Ger&aumlt mit installierter MI APP. 
+		<br/>Zum setzen des Entwicklermodusses braucht man ein android oder ios Ger&auml;t mit installierter MI APP.
-		<br/>Um das versteckte Men&uuml zu &oumlffnen muss man mehrmals auf die Versionsnummer der MI APP klicken.
+		<br/>Um das versteckte Men&uuml; zu &ouml;ffnen muss man mehrmals auf die Versionsnummer der MI APP klicken.
 		<br/>Hier finden Sie eine Anleitung mit Bildern.
 		<br/>Android -> https://louiszl.gitbooks.io/lumi-gateway-local-api/content/device_discover.html
 		<br/>IOS  -> https://github.com/fooxy/homeassistant-aqara/wiki/Enable-dev-mode
@@ -958,32 +1056,33 @@ sub XiaomiSmartHome_updateAllReadings($)
 	<br/>
 	<b>Unterstütze Sensoren</b>
 	<ul>
-		<li>magnet: Magnetischer Fenster/T&uumlr Sensor</li>
+		<li>magnet: Magnetischer Fenster/T&uuml;r Sensor</li>
 		<li>motion: Bewegungsmelder</li>
 		<li>sensor_ht: Temperatur und Luftdruck</li>
 		<li>switch: Funkschalter</li>
 		<li>plug & 86plug: Schaltbare Funksteckdose</li>
-		<li>cube: W&uumlrfel Sensor</li>
+		<li>cube: W&uuml;rfel Sensor</li>
 		<li>86sw1: Einfacher Wandfunkschalter</li>
 		<li>86sw2: Wandfunkschalter doppelt</li>
 		<li>ctrl_neutral1: Einfacher Wandschalter schaltbar</li>
 		<li>ctrl_neutral2: Doppelter Wandschalter schaltbar</li>
 		<li>rgbw_light: RBGW Lampe (nur Anzeige)</li>
-		<li>curtain: Vorhangmotor (ohne das das device den curtain_level gemeldet hat ist ein steuern nicht möglich)</li>
+		<li>curtain: Vorhangmotor (ohne dass das Device den curtain_level gemeldet hat ist ein Steuern nicht m&ouml;glich)</li>
+		<li>water: Wasser Sensor</li>
 		<li>smoke: Rauchmelder</li>
 		<ul>
 			<li>0: disarm</li>
-			<li>1: arlarm</li>
+			<li>1: alarm</li>
-			<li>8: battery arlarm</li>
+			<li>8: battery alarm</li>
-			<li>64: arlarm sensitivity</li>
+			<li>64: alarm sensitivity</li>
 			<li>32768: ICC communication failure</li>
 		</ul>
 		<li>gas: Gasmelder</li>
 		<ul>
 			<li>0: disarm</li>
-			<li>1: arlarm</li>
+			<li>1: alarm</li>
-			<li>2: analog arlarm</li>
+			<li>2: analog alarm</li>
-			<li>64: arlarm sensitivity</li>
+			<li>64: alarm sensitivity</li>
 			<li>32768: ICC communication failure</li>
 		</ul>
 	</ul>
@@ -992,27 +1091,29 @@ sub XiaomiSmartHome_updateAllReadings($)
 	<ul>
 		<li>Das XiaomiSmartHome Gateway sendet alle 10 seconds einen heartbeat</li>
 		<li>Jedes XiaomiSmartHome Devices sendet alle 60 Minuten einen heartbeat</li>
-		<li>Das Reading heartbeat wird mit der SID des jeweiligen Gerätes beim empfang eines Heartbeat aktualisiert</li>
+		<li>Das Reading heartbeat wird mit der SID des jeweiligen Gerätes beim Empfang eines Heartbeat aktualisiert</li>
 	</ul>
 	<br/>
 	<b>Set: Gateway</b>
 	<ul>
-		<li>password: Ohne Passwort ist ein Schalten des GATEWAY nicht m&oumlglich. Das Passwort findet man in der MI APP</li>
+		<li>password: Ohne Passwort ist ein Schalten des GATEWAY nicht m&ouml;glich. Das Passwort findet man in der MI APP</li>
 		<li>RGB(Colorpicker): Einstellen der LED Farbe des Gateways</li>
 		<li>PCT(Slider): Einstellen der Helligkeit des Gateways</li>
-		<li>ringtone: Wiedergeben eines Arlarmtones 0-8,13,21-29,10001-.. Benutzerdefinierte| 10000 = aus</li>
+		<li>intervals: Einschalten des Gateways für einen Zeitraum zb. set intervals 07:00-08:00</li>
-		<li>volume: Einstellen der Lautst&aumlrke des Arlarmtones 1-100, (100 ist sehr laut!)</li>
+		<li>ringtone: Wiedergeben eines Alarmtones 0-8,13,21-29,10001-.. Benutzerdefinierte| 10000 = aus</li>
-		<li>ringvol: Wiedergeben eines Arlamtones und gleichzeitiges verändern der Lautst&aumlrke set [GWNAME] ringvol 21 10</li>
+		<li>volume: Einstellen der Lautst&auml;rke des Alarmtones 1-100, (100 ist sehr laut!)</li>
+		<li>ringvol: Wiedergeben eines Arlamtones und gleichzeitiges ver&auml;ndern der Lautst&auml;rke set [GWNAME] ringvol 21 10</li>
+		<li>learn: Anlernen neuer Sensoren, nach dem Set an dem neuen Sensor den Button dr&uuml;cken</li>
 	</ul>
 	<br/>
 	<b>Set: Devices</b>
 	<ul>
 		<li>motionOffTimer:  (nur Bewegungsmelder)
-		<br/>Durch setzen des Parameters ist es m&oumlglich das das Reading des Bewegungsmelder nach 1, 5 oder 10 Sekunden
+		<br/>Durch setzen des Parameters ist es m&ouml;glich, dass das Reading des Bewegungsmelder nach 1, 5 oder 10 Sekunden
 		<br/>automatisch wieder auf off gestellt wird.
-		<br/>Hintergrund: Der Bewegungsmelder sendet kein selber kein off.
+		<br/>Hintergrund: Der Bewegungsmelder sendet selber kein off.
-		<br/>Der Bewegungsmelder sendet no_motion nach 120, 180, 300, 600, 1200 Sekunden wenn keine Bewegung festgestellt wurde.</li>
+		<br/>Der Bewegungsmelder sendet no_motion nach 120, 180, 300, 600, 1200 Sekunden, wenn keine Bewegung festgestellt wurde.</li>
-		<li>Power: (nur Funksteckdose) on off Funktsteckdose ein oder ausschalten</li>
+		<li>Power: (nur Funksteckdose) on off Funksteckdose ein oder ausschalten</li>
 		<li>ctrl: (nur Funkschalter) on off Funkschalter </li>
 		<li>channel_0: (nur Doppelter Wandschalter schaltbar) ein oder ausschalten </li>
 		<li>channel_1: (nur Doppelter Wandschalter schaltbar) ein oder ausschalten </li>
@@ -1024,5 +1125,3 @@ sub XiaomiSmartHome_updateAllReadings($)
 
 =cut
 
-
-

FHEM/71_XiaomiSmartHome_Device.pm

@@ -25,7 +25,10 @@ package main;
 use strict;
 use warnings;
 
-my $version = "1.08";
+
+
+my $version = "1.40";
+
 sub XiaomiSmartHome_Device_updateSReading($);
 
 
@@ -35,14 +38,19 @@ sub XiaomiSmartHome_Device_Initialize($)
 {
   my ($hash) = @_;
 
-  $hash->{Match}     = ".*magnet.*|.*motion.*|sensor_ht|.*switch.*|plug|cube|86sw1|86sw2|ctrl_neutral1|ctrl_neutral2|rgbw_light|curtain|ctrl_ln1|ctrl_ln2|86plug|natgas|smoke|weather.v1";
+  $hash->{Match}     = ".*magnet.*|.*motion.*|sensor_ht|.*switch.*|plug|.*cube.*|86sw1|86sw2|ctrl_neutral1|ctrl_neutral2|rgbw_light|curtain|ctrl_ln1|ctrl_ln2|86plug|natgas|smoke|weather.v1|sensor_wleak.aq1|vibration|remote.b186acn01|remote.b286acn01|remote.b1acn01";
   $hash->{DefFn}     = "XiaomiSmartHome_Device_Define";
   $hash->{SetFn}     = "XiaomiSmartHome_Device_Set";
   $hash->{UndefFn}   = "XiaomiSmartHome_Device_Undef";
   $hash->{ParseFn}   = "XiaomiSmartHome_Device_Parse";
+  $hash->{FingerprintFn} = "XiaomiSmartHome_Device_Fingerprint";
 
-  $hash->{AttrList}  = "IODev follow-on-for-timer:1,0 follow-on-timer ".
+  $hash->{AttrList}  = "follow-on-for-timer:1,0 follow-on-timer ".
                        "do_not_notify:1,0 ignore:1,0 dummy:1,0 showtime:1,0 valueFn:textField-long ".
+					   "rnd_tmp:0,1,2,3 ".
+					   "rnd_hum:0,1,2,3 ".
+					   "rnd_bat:0,1,2,3 ".
+					   "rnd_pres:0,1,2,3 ".
                        $readingFnAttributes ;
 }
 #####################################
@@ -190,6 +198,12 @@ sub XiaomiSmartHome_Device_on_timeout($){
 #####################################
 sub XiaomiSmartHome_Device_Read($$$){
 	my ($hash, $msg, $name) = @_;
+
+	my $XMIround_tmp = AttrVal( $hash->{NAME}, "rnd_tmp", "2" );
+	my $XMIround_hum = AttrVal( $hash->{NAME}, "rnd_hum", "2" );
+	my $XMIround_bat = AttrVal( $hash->{NAME}, "rnd_bat", "1" );
+	my $XMIround_pres = AttrVal( $hash->{NAME}, "rnd_pres", "2" );
+
 	my $decoded = eval{decode_json($msg)};
 	if ($@) {
 		Log3 $name, 1, "$name: DEV_Read> Error while request: $@";
@@ -197,6 +211,7 @@ sub XiaomiSmartHome_Device_Read($$$){
 	}
 	my $sid = $decoded->{'sid'};
 	my $model = $decoded->{'model'};
+	my $cmd = $decoded->{'cmd'};
 	Log3 $name, 5, "$name: DEV_Read> SID: " . $hash->{SID} . " " . $hash->{TYPE};
 	my $data = eval{decode_json($decoded->{data})};
 	if ($@) {
@@ -214,37 +229,54 @@ sub XiaomiSmartHome_Device_Read($$$){
 				readingsBulkUpdate($hash, "no_close", "0", 1 );
 				}
 			}
+
 		if (defined $data->{no_motion}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " NO_motion: " . $data->{no_motion};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " NO_motion: " . $data->{no_motion};
 			readingsBulkUpdate($hash, "no_motion", "$data->{no_motion}", 1 );
 			}
 		if (defined $data->{no_close}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " NO_close: " . $data->{no_close};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " NO_close: " . $data->{no_close};
 			readingsBulkUpdate($hash, "no_close", "$data->{no_close}", 1 );
 			}
 		if (defined $data->{voltage}){
 			my $bat = ($data->{voltage}/1000);
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Voltage: " . $data->{voltage};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Voltage: " . $data->{voltage};
-		readingsBulkUpdate($hash, "battery", $bat, 1 );
+			if ($bat < 2.2) {
+				readingsBulkUpdate($hash, "batteryState", "low", 1 );
+				}
+				else {
+					readingsBulkUpdate($hash, "batteryState", "ok", 1 )
+				}
+			$bat = XiaomiSmartHome_round($bat, $XMIround_bat, $name );
+			readingsBulkUpdate($hash, "batteryVoltage", $bat, 1 );
 			}
 		if (defined $data->{temperature}){
-		my $temp = $data->{temperature};
+			if ($data->{temperature} ne "10000"){
-		$temp =~ s/(^[-+]?\d+?(?=(?>(?:\d{2})+)(?!\d))|\G\d{2}(?=\d))/$1./g;
+				my $temp = sprintf( "%#.4d", $data->{temperature});
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Temperature: " . $temp;
+				$temp =~ s/(^[-+]?\d+?(?=(?>(?:\d{2})+)(?!\d))|\G\d{3}(?=\d))/$1./g;
+				$temp = XiaomiSmartHome_round($temp, $XMIround_tmp, $name );
+				Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Temperature: " . $temp . " Round: " . $XMIround_tmp;
 				readingsBulkUpdate($hash, "temperature", "$temp", 1 );
 				}
+			}
 		if (defined $data->{humidity}){
+			if ($data->{humidity} ne "0"){
 				my $hum = $data->{humidity};
 				$hum =~ s/(^[-+]?\d+?(?=(?>(?:\d{2})+)(?!\d))|\G\d{2}(?=\d))/$1./g;
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Humidity: " . $hum;
+				$hum = XiaomiSmartHome_round($hum, $XMIround_hum, $name );
+				Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Humidity: " . $hum . " Round: " . $XMIround_hum;
 				readingsBulkUpdate($hash, "humidity", "$hum", 1 );
 				}
+			}
 		if (defined $data->{pressure}){
+			if ($data->{pressure} ne "0"){
 				my $pres = $data->{pressure};
 				$pres =~ s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))|\G\d{3}(?=\d))/$1./g;
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Pressure: " . $pres;
+				$pres = XiaomiSmartHome_round($pres, $XMIround_pres, $name );
+				Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Pressure: " . $pres . " Round: " . $XMIround_pres;
 				readingsBulkUpdate($hash, "pressure", "$pres", 1 );
 				}
+			}
 		if (defined $data->{lux}){
 			my $lux = $data->{lux};
 			Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Illuminance: " . $lux;
@@ -259,48 +291,52 @@ sub XiaomiSmartHome_Device_Read($$$){
 			Log3 $name, 3, "$name: DEV_Read>" . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Channel_1: " . $data->{channel_1};
 			readingsBulkUpdate($hash, "channel_1", "$data->{channel_1}", 1 );
 			}
+		if (defined $data->{dual_channel}){
+			Log3 $name, 3, "$name: DEV_Read>" . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Dual_Channel: " . $data->{dual_channel};
+			readingsBulkUpdate($hash, "dual_channel", "$data->{dual_channel}", 1 );
+			}
 		#86sw1 + 86sw2 + ctrl_neutral1 + ctrl_neutral2 end
 		#plug & 86plug start
 		if (defined $data->{load_voltage}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " LOAD_Voltage: " . $data->{load_voltage};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " LOAD_Voltage: " . $data->{load_voltage};
 			readingsBulkUpdate($hash, "LOAD_Voltage", "$data->{load_voltage}", 1 );
 			}
 		if (defined $data->{load_power}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " LOAD_Power: " . $data->{load_power};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " LOAD_Power: " . $data->{load_power};
 			readingsBulkUpdate($hash, "LOAD_Power", "$data->{load_power}", 1 );
 			}
 		if (defined $data->{power_consumed}){
-		Log3 $name, 3, "$name:" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " POWER_Consumed: " . $data->{power_consumed};
+			Log3 $name, 4, "$name:" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " POWER_Consumed: " . $data->{power_consumed};
 			readingsBulkUpdate($hash, "POWER_Consumed", "$data->{power_consumed}", 1 );
 			}
 		if (defined $data->{inuse}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " InUse: " . $data->{inuse};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " InUse: " . $data->{inuse};
 			readingsBulkUpdate($hash, "inuse", "$data->{inuse}", 1 );
 			}
 		#plug & 86plug end
 		#rgbw_light start
 		if (defined $data->{level}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Level: " . $data->{level};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Level: " . $data->{level};
 			readingsBulkUpdate($hash, "level", "$data->{level}", 1 );
 			}
 		if (defined $data->{hue}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Hue: " . $data->{hue};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Hue: " . $data->{hue};
 			readingsBulkUpdate($hash, "hue", "$data->{hue}", 1 );
 			}
 		if (defined $data->{saturation}){
-		Log3 $name, 3, "$name:" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Saturation: " . $data->{saturation};
+			Log3 $name, 4, "$name:" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Saturation: " . $data->{saturation};
 			readingsBulkUpdate($hash, "saturation", "$data->{saturation}", 1 );
 			}
 		if (defined $data->{color_temperature}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Color_temperature: " . $data->{color_temperature};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Color_temperature: " . $data->{color_temperature};
 			readingsBulkUpdate($hash, "color_temperature", "$data->{color_temperature}", 1 );
 			}
 		if (defined $data->{x}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " X: " . $data->{x};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " X: " . $data->{x};
 			readingsBulkUpdate($hash, "x", "$data->{x}", 1 );
 			}
 		if (defined $data->{y}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Y: " . $data->{y};
+			Log3 $name, 4, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Y: " . $data->{y};
 			readingsBulkUpdate($hash, "y", "$data->{y}", 1 );
 			}
 		#rgbw_light end
@@ -313,19 +349,34 @@ sub XiaomiSmartHome_Device_Read($$$){
 		#cube end
 		#smoke & natgast start
 		if (defined $data->{alarm}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Rotate: " . $data->{arlarm};
+			Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Alarm: " . $data->{alarm};
-		readingsBulkUpdate($hash, "arlarm", "$data->{arlarm}", 1 );
+			readingsBulkUpdate($hash, "alarm", "$data->{alarm}", 1 );
+			}
+		if (defined $data->{density}){
+			Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Density: " . $data->{density};
+			readingsBulkUpdate($hash, "density", "$data->{density}", 1 );
 			}
 		#smoke & natgast end
 		#curtain start
 		if (defined $data->{curtain_level}){
-		Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Rotate: " . $data->{curtain_level};
+			Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Curtain: " . $data->{curtain_level};
-		readingsBulkUpdate($hash, "arlarm", "$data->{curtain_level}", 1 );
+			readingsBulkUpdate($hash, "alarm", "$data->{curtain_level}", 1 );
 			}
 		#curtain end
+    #vibration Start
+    if (defined $data->{'coordination'}){
+      Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Coordination: " . $data->{coordination};
+      readingsBulkUpdate($hash, "coordination", "$data->{coordination}", 1 );
+      }
+    if (defined $data->{'final_tilt_angle'}){
+      Log3 $name, 3, "$name: DEV_Read>" . " Name: " . $hash->{NAME} . " SID: " . $sid . " Type: " . $hash->{MODEL}  . " Final tilt angle: " . $data->{final_tilt_angle};
+      readingsBulkUpdate($hash, "final_tilt_angle", "$data->{final_tilt_angle}", 1 );
+      }
+    #vibration end
 		if ($decoded->{'cmd'} eq 'heartbeat'){
 		readingsBulkUpdate($hash, 'heartbeat', $decoded->{'sid'} , 1 );
 		}
+
 	readingsEndUpdate( $hash, 1 );
 	XiaomiSmartHome_Device_update($hash);
 	return $hash->{NAME};
@@ -343,15 +394,17 @@ sub XiaomiSmartHome_Device_Parse($$) {
 	}
 	my $sid = $decoded->{'sid'};
 	my $model = $decoded->{'model'};
-	if (my $hash = $modules{XiaomiSmartHome_Device}{defptr}{$sid})
+	if ($modules{XiaomiSmartHome_Device}{defptr}{$sid}{IODev}->{NAME})
 	{
-		Log3 $name, 4, "$name: DEV_Parse> IS DEFINED " . $model . " : " .$sid;
+		my $hash = $modules{XiaomiSmartHome_Device}{defptr}{$sid}->{IODev};
+		Log3 $name, 5, "$name: DEV_Parse> IS DEFINED " . $model . " : " . $sid . " " . $modules{XiaomiSmartHome_Device}{defptr}{$sid}->{IODev};
+		$hash = $modules{XiaomiSmartHome_Device}{defptr}{$sid};
 		XiaomiSmartHome_Device_Read($hash, $msg, $name);
 	}
 	else
 	{
 
-		Log3 $name, 4, "$name: DEV_Parse> UNDEFINED " . $model . " : " .$sid;
+		Log3 $name, 1, "$name: DEV_Parse> UNDEFINED " . $model . " : " .$sid;
 		return "UNDEFINED XMI_$sid XiaomiSmartHome_Device $sid $model $name";
 	}
 }
@@ -369,14 +422,19 @@ sub XiaomiSmartHome_Device_update($){
     my $LASTCMD = ReadingsVal($name,"lastCmd",undef);
 
     my $value_fn = eval $value_fn;
-    Log3 $name, 3, $name .": DEV_Update valueFn: ". $@ if($@);
+    Log3 $name, 4, $name .": DEV_Update valueFn: ". $@ if($@);
     return undef if( !defined($value_fn) );
   }
   if( $model =~ /motion/) {
 	XiaomiSmartHome_Device_mot($hash, $hash->{READINGS}{motionOffTimer}{VAL}) if( $hash->{READINGS}{motionOffTimer});
 	}
-  # Update delete old reading Voltage
+  # Update delete old reading voltage & batterystate
   CommandDeleteReading( undef, "$name voltage" ) if(defined(ReadingsVal($name,"voltage",undef)));
+  CommandDeleteReading( undef, "$name batterystate" ) if(defined(ReadingsVal($name,"batterystate",undef)));
+  CommandDeleteReading( undef, "$name round" ) if(defined(ReadingsVal($name,"round",undef)));
+  CommandDeleteReading( undef, "$name battery_level" ) if(defined(ReadingsVal($name,"battery_level",undef)));
+  CommandDeleteReading( undef, "$name battery" ) if(defined(ReadingsVal($name,"battery",undef)));
+  CommandDeleteReading( undef, "$name batteryLevel" ) if(defined(ReadingsVal($name,"batteryLevel",undef)));
 }
 #####################################
 
@@ -392,6 +450,7 @@ sub XiaomiSmartHome_Device_Define($$) {
 	$hash->{STATE} = 'initialized';
 	$modules{XiaomiSmartHome_Device}{defptr}{$sid} = $hash;
 	AssignIoPort($hash,$iodev);
+	my $room = $attr{$iodev}{room};
 
 	if(defined($hash->{IODev}->{NAME})) {
         my $IOname = $hash->{IODev}->{NAME};
@@ -401,14 +460,16 @@ sub XiaomiSmartHome_Device_Define($$) {
     }
     $iodev = $hash->{IODev}->{NAME};
 
-    my $d = $modules{XiaomiSmartHome_Device}{defptr}{$name};
+    my $d = $modules{XiaomiSmartHome_Device}{defptr}{$sid};
 
-    return "XiaomiSmartHome device $hash->{SID} on XiaomiSmartHome $iodev already defined as $d->{NAME}." if( defined($d) && $d->{IODev} == $hash->{IODev} && $d->{NAME} ne $name );
+    return "XiaomiSmartHome device $hash->{SID} on XiaomiSmartHome $iodev already defined as $d->{SID}." if( defined($d) && $d->{IODev} == $hash->{IODev} && $d->{SID} ne $sid );
 
     Log3 $name, 4, $iodev . ": DEV_Define> " . $name . ": defined as ". $hash->{MODEL};
-    $attr{$name}{room} = "MiSmartHome" if( !defined( $attr{$name}{room} ) );
+    $attr{$name}{room} = $room if( !defined( $attr{$name}{room} ) );
     if( $type =~ /motion/) {
+    readingsSingleUpdate($hash, "state", "motion", 1 ) if( !defined( $attr{$name}{devStateIcon} ));
 		$attr{$name}{devStateIcon}  = 'motion:motion_detector@red off:motion_detector@green no_motion:motion_detector@green' if( !defined( $attr{$name}{devStateIcon} ) );
+
 	}
 	elsif ( $type =~ /magnet/) {
 		$attr{$name}{devStateIcon}  = 'open:fts_door_open@red close:fts_door@green' if( !defined( $attr{$name}{devStateIcon} ) );
@@ -426,12 +487,20 @@ sub XiaomiSmartHome_Device_Define($$) {
 	}
 	return undef;
 }
+#####################################
+sub XiaomiSmartHome_Device_Fingerprint($$){
+	my ($io_name, $msg) = @_;
+	Log3 $io_name, 4, "$io_name: Fingerprint> for $msg";
+	return ($io_name, $msg );
+
+}
+
 #####################################
 sub XiaomiSmartHome_Device_updateSReading($) {
 
     my $hash        = shift;
 	my $name = $hash->{NAME};
-	Log3 $name, 3, "$name: DEV_updateSReading> for $hash->{SID}";
+	Log3 $name, 4, "$name: DEV_updateSReading> for $hash->{SID}";
 	RemoveInternalTimer($hash,'XiaomiSmartHome_Device_updateSReading');
     IOWrite($hash,'read',"$hash->{SID}");
 }
@@ -443,17 +512,36 @@ sub XiaomiSmartHome_Device_Undef($)
 	my ($hash, $arg) = @_;
 	my $name = $hash->{NAME};
 	my $iodev = $hash->{IODev}->{NAME};
+	my $sid = $hash->{SID};
 	RemoveInternalTimer($hash);
-	delete($modules{XiaomiSmartHome_Device}{defptr}{$hash->{SID}});
+	Log3 $name, 1, "$iodev: DEV_Undef> ". $hash->{SID} . " > " . $modules{XiaomiSmartHome_Device}{defptr}{$hash->{SID}} . " > " . $sid ." > " . $modules{XiaomiSmartHome_Device}{defptr}{$sid};
-    Log3 $name, 3, "$iodev: DEV_Undef> $name - device deleted";
+	my $error = delete ($modules{XiaomiSmartHome_Device}{defptr}{$sid});
+    Log3 $name, 1, "$iodev: DEV_Undef> $name - device deleted " . $error;
     return undef;
 
 }
+#####################################
+
+sub XiaomiSmartHome_round {
+  my ($n, $p, $name) = @_;
+  Log3 $name, 5, "$name: DEV_Round>" . " Value: " . $n . " points: " . $p;
+  my $sign = ($n > 0) ? 1 : -1;
+
+  $p ||= 0;
+  $n *= 10 ** $p;
+  $n = int($n + .5 * $sign);
+  my $res =  sprintf( "%." . $p . "f", $n / 10**$p);
+  Log3 $name, 5, "$name: DEV_Round>" . " Result_value: " . $res;
+  return $res;
+}
+
+
 1;
 
 =pod
 =item device
 =item summary Module to control XiaomiSmartHome Gateway
+=item summary_DE Modul zum steuern des  XiaomiSmartHome Gateway
 
 
 =begin html
@@ -492,15 +580,35 @@ sub XiaomiSmartHome_Device_Undef($)
 	<ul>
 		<li>magnet: Window/Door magnetic sensor</li>
 		<li>motion: Human body motion sensor</li>
-		<li>sensor_ht: Temperatur and humidity sensor</li>
+		<li>sensor_motion.aq2: Aqara Human body motion sensor with lux readings</li>
+		<li>sensor_ht: Temperature and humidity sensor</li>
+		<li>weather.v1: Aqara Temperature, pressure and humidity sensor</li>
 		<li>switch: Wireless sensor switch</li>
-		<li>plug: Smart socket</li>
+		<li>plug & 86plug: Smart socket</li>
 		<li>cube: Cube sensor</li>
 		<li>86sw1: Wireless switch single</li>
 		<li>86sw2: Wireless switch double</li>
 		<li>ctrl_neutral1: Single bond ignition switch</li>
 		<li>ctrl_neutral2: Double bond ignition switch</li>
 		<li>rgbw_light: Smart lights (report only)</li>
+		<li>curtain: Curtain (Control only if device has reporte curtain_level)</li>
+		<li>water: water detector</li>
+		<li>smoke: smoke alarm detector</li>
+		<ul>
+			<li>0: disarm</li>
+			<li>1: alarm</li>
+			<li>8: battery alarm</li>
+			<li>64: alarm sensitivity</li>
+			<li>32768: ICC communication failure</li>
+		</ul>
+		<li>gas: gas alarm detector</li>
+		<ul>
+			<li>0: disarm</li>
+			<li>1: alarm</li>
+			<li>2: analog alarm</li>
+			<li>64: alarm sensitivity</li>
+			<li>32768: ICC communication failure</li>
+		</ul>
 	</ul>
 	<br/>
 	<b>Heartbeat</b>
@@ -515,16 +623,18 @@ sub XiaomiSmartHome_Device_Undef($)
 		<li>password: without password no write to the gateway is possible. Use the MI APP to find the password</li>
 		<li>RGB(Colorpicker): set the color</li>
 		<li>PCT(Slider): set the brightness in percent</li>
+		<li>intervals: set the gateway to on for an time eg. set intervals 07:00-08:00</li>
 		<li>ringtone: set the ringtone 0-8,13,21-29,10001-.. | 10000 = off</li>
 		<li>volume: set the volume 1-100, (100 is very loud)</li>
 		<li>ringvol: set ringtone and volume in on step e.g. set [GWNAME] ringvol 21 10</li>
+		<li>learn: set the gateway in learningmode to learn new sensors now push the button from the new sensor</li>
 	</ul>
 	<br/>
 	<b>Set: Devices</b>
 	<ul>
 		<li>motionOffTimer:  (only motionsensor)
 		<br/>You can set a motion Off Timer Attribut on the motion sensor device. You can set 1, 5 or 10 seconds after
-		<br/>the motion sensors will automatically set to off.
+		<br/>the motion sensors will automatically set to off. MotionOffTimer is set to 5 by default.
 		<br/>Background: The motionsensors does not send off immediately.
 		<br/>The Motionsensor send a no_motion after 120, 180, 300, 600, 1200 seconds no motion is detected.</li>
 		<li>Power: (only smart soket) on off switch a plug on or off</li>
@@ -538,15 +648,15 @@ sub XiaomiSmartHome_Device_Undef($)
 
 =begin html_DE
 
-<a name="XiaomiSmartHome"></a>
+<a name="XiaomiSmartHome_Device"></a>
 <h3>XiaomiSmartHome</h3>
 <ul>
     <i>XiaomiSmartHome</i> Steuern des XiaomiSmartHome Gateway und deren verbundener Sensoren.
     <a name="XiaomiSmartHome"></a>
 	<br/>
-	<b>Vorraussetzungen</b>
+	<b>Voraussetzungen</b>
 	<ul>
-		<li>Diese Pakete m&uumlssen installiert sein: apt-get install libio-socket-multicast-perl libjson-perl libcrypt-cbc-perl</li>
+		<li>Diese Pakete m&uuml;ssen installiert sein: apt-get install libio-socket-multicast-perl libjson-perl libcrypt-cbc-perl</li>
 		<li>Und mit CPAN: cpan Crypt::Cipher::AES</li>
 	</ul>
 	<br/>
@@ -558,11 +668,11 @@ sub XiaomiSmartHome_Device_Undef($)
         <br><br>
     </ul>
 	<br/>
-	<b>Entwicklermodus am Gatway setzen!</b>
+	<b>Entwicklermodus am Gateway setzen!</b>
     <ul>
-		<p>Ohne Entwicklermodus ist keine Komunikation mit dem Gateway m&oumlglich.
+		<p>Ohne Entwicklermodus ist keine Kommunikation mit dem Gateway m&ouml;glich.
-		<br/>Zum setzen des Entwicklermoduses braucht man ein android oder ios Ger&aumlt mit installierter MI APP. 
+		<br/>Zum setzen des Entwicklermodusses braucht man ein android oder ios Ger&auml;t mit installierter MI APP.
-		<br/>Um das versteckte Men&uuml zu &oumlffnen muss man mehrmals auf die Versionsnummer der MI APP klicken.
+		<br/>Um das versteckte Men&uuml; zu &ouml;ffnen muss man mehrmals auf die Versionsnummer der MI APP klicken.
 		<br/>Hier finden Sie eine Anleitung mit Bildern.
 		<br/>Android -> https://louiszl.gitbooks.io/lumi-gateway-local-api/content/device_discover.html
 		<br/>IOS  -> https://github.com/fooxy/homeassistant-aqara/wiki/Enable-dev-mode
@@ -571,46 +681,64 @@ sub XiaomiSmartHome_Device_Undef($)
 	<br/>
 	<b>Unterstütze Sensoren</b>
 	<ul>
-		<li>magnet: Magnetischer Fenster/T&uumlr Sensor</li>
+		<li>magnet: Magnetischer Fenster/T&uuml;r Sensor</li>
 		<li>motion: Bewegungsmelder</li>
-		<li>sensor_motion.aq2: Aqara Bewegungsmelder mit lux-Messung</li>
 		<li>sensor_ht: Temperatur und Luftdruck</li>
-		<li>weather.v1: Aqara Temperatur, Luftdruck und Feuchtigkeit</li>
 		<li>switch: Funkschalter</li>
-		<li>plug: Schaltbare Funksteckdose</li>
+		<li>plug & 86plug: Schaltbare Funksteckdose</li>
-		<li>cube: W&uumlrfel Sensor</li>
+		<li>cube: W&uuml;rfel Sensor</li>
 		<li>86sw1: Einfacher Wandfunkschalter</li>
 		<li>86sw2: Wandfunkschalter doppelt</li>
 		<li>ctrl_neutral1: Einfacher Wandschalter schaltbar</li>
 		<li>ctrl_neutral2: Doppelter Wandschalter schaltbar</li>
 		<li>rgbw_light: RBGW Lampe (nur Anzeige)</li>
+		<li>curtain: Vorhangmotor (ohne dass das Device den curtain_level gemeldet hat ist ein Steuern nicht &ouml;glich)</li>
+		<li>water: Wasser Sensor</li>
+		<li>smoke: Rauchmelder</li>
+		<ul>
+			<li>0: disarm</li>
+			<li>1: alarm</li>
+			<li>8: battery alarm</li>
+			<li>64: alarm sensitivity</li>
+			<li>32768: ICC communication failure</li>
+		</ul>
+		<li>gas: Gasmelder</li>
+		<ul>
+			<li>0: disarm</li>
+			<li>1: alarm</li>
+			<li>2: analog alarm</li>
+			<li>64: alarm sensitivity</li>
+			<li>32768: ICC communication failure</li>
+		</ul>
 	</ul>
 	<br/>
 	<b>Heartbeat</b>
 	<ul>
 		<li>Das XiaomiSmartHome Gateway sendet alle 10 seconds einen heartbeat</li>
 		<li>Jedes XiaomiSmartHome Devices sendet alle 60 Minuten einen heartbeat</li>
-		<li>Das Reading heartbeat wird mit der SID des jeweiligen Gerätes beim empfang eines Heartbeat aktualisiert</li>
+		<li>Das Reading heartbeat wird mit der SID des jeweiligen Gerätes beim Empfang eines Heartbeat aktualisiert</li>
 	</ul>
 	<br/>
 	<b>Set: Gateway</b>
 	<ul>
-		<li>password: Ohne Passwort ist ein Schalten des GATEWAY nicht m&oumlglich. Das Passwort findet man in der MI APP</li>
+		<li>password: Ohne Passwort ist ein Schalten des GATEWAY nicht m&ouml;glich. Das Passwort findet man in der MI APP</li>
 		<li>RGB(Colorpicker): Einstellen der LED Farbe des Gateways</li>
 		<li>PCT(Slider): Einstellen der Helligkeit des Gateways</li>
-		<li>ringtone: Wiedergeben eines Arlarmtones 0-8,13,21-29,10001-.. Benutzerdefinierte| 10000 = aus</li>
+		<li>intervals: Einschalten des Gateways für einen Zeitraum zb. set intervals 07:00-08:00</li>
-		<li>volume: Einstellen der Lautst&aumlrke des Arlarmtones 1-100, (100 ist sehr laut!)</li>
+		<li>ringtone: Wiedergeben eines Alarmtones 0-8,13,21-29,10001-.. Benutzerdefinierte| 10000 = aus</li>
-		<li>ringvol: Wiedergeben eines Arlamtones und gleichzeitiges verändern der Lautst&aumlrke set [GWNAME] ringvol 21 10</li>
+		<li>volume: Einstellen der Lautst&auml;rke des Alarmtones 1-100, (100 ist sehr laut!)</li>
+		<li>ringvol: Wiedergeben eines Arlamtones und gleichzeitiges ver&auml;ndern der Lautst&auml;rke set [GWNAME] ringvol 21 10</li>
+		<li>learn: Anlernen neuer Sensoren, nach dem Set an dem neuen Sensor den Button dr&uuml;cken</li>
 	</ul>
 	<br/>
 	<b>Set: Devices</b>
 	<ul>
 		<li>motionOffTimer:  (nur Bewegungsmelder)
-		<br/>Durch setzen des Parameters ist es m&oumlglich das das Reading des Bewegungsmelder nach 1, 5 oder 10 Sekunden
+		<br/>Durch setzen des Parameters ist es m&ouml;glich, dass das Reading des Bewegungsmelder nach 1, 5 oder 10 Sekunden
-		<br/>automatisch wieder auf off gestellt wird. Standardmäßig ist dieser Wert auf 5 gestellt, sodass der Sensor alle 5 Sekunden auf eine erneute Bewegung reagiert.
+		<br/>automatisch wieder auf off gestellt wird.
-		<br/>Hintergrund: Der Bewegungsmelder sendet kein selber kein off.
+		<br/>Hintergrund: Der Bewegungsmelder sendet selber kein off.
-		<br/>Der Bewegungsmelder sendet no_motion nach 120, 180, 300, 600, 1200 Sekunden wenn keine Bewegung festgestellt wurde.</li>
+		<br/>Der Bewegungsmelder sendet no_motion nach 120, 180, 300, 600, 1200 Sekunden, wenn keine Bewegung festgestellt wurde.</li>
-		<li>Power: (nur Funksteckdose) on off Funktsteckdose ein oder ausschalten</li>
+		<li>Power: (nur Funksteckdose) on off Funksteckdose ein oder ausschalten</li>
 		<li>ctrl: (nur Funkschalter) on off Funkschalter </li>
 		<li>channel_0: (nur Doppelter Wandschalter schaltbar) ein oder ausschalten </li>
 		<li>channel_1: (nur Doppelter Wandschalter schaltbar) ein oder ausschalten </li>
@@ -620,3 +748,4 @@ sub XiaomiSmartHome_Device_Undef($)
 =end html_DE
 
 =cut
+

README.md

@@ -1,6 +1,44 @@
 # fhem-XiaomiSmartHome Gateway
-With this module, the XiaomiGateway is bound to Fhem. The module listens for multicast messages from the gateway. Currently only  for the sensortype Magnet, Motion, Temperature-Humidity, Switch, Cube, Curtain, Smoke and Gas. 
+With this module, the Xiaomi Smarthome Gateway is bound to FHEM. The module listens for multicast messages from the gateway. 
-Changing and switching the led of the gateway and changing ringtone and volume of the gateway is also possible
+Changing and switching the LED from the gateway and changing ringtone and volume of the gateway is also possible
 
 * Please read the Wiki !! you need to install some Perl modules.
 * https://github.com/T0RST3N/fhem-XiaomiSmartHome/wiki
+
+# Supported Sensors
+* magnet: Window/Door magnetic sensor
+* motion: Human body motion sensor
+* sensor_motion.aq2: Aqara Human body motion sensor with lux readings
+* sensor_ht: Temperature and humidity sensor
+* weather.v1: Aqara Temperature, pressure and humidity sensor
+* switch: Wireless sensor switch
+* plug & 86plug: Smart socket
+* cube: Cube sensor
+* 86sw1: Wireless switch single
+* 86sw2: Wireless switch double
+* ctrl_neutral1: Single bond ignition switch
+* ctrl_neutral2: Double bond ignition switch
+* rgbw_light: Smart lights (report only)
+* curtain: Curtain (Control only if device has reporte curtain_level)
+* wleak: Watersensor
+* smoke: smoke alarm detector
+* * 0: disarm
+* * 1: arlarm
+* * 8: battery arlarm
+* * 64: arlarm sensitivity
+* * 32768: ICC communication failure
+* gas: gas alarm detector
+* * 0: disarm
+* * 1: arlarm
+* * 2: analog arlarm
+* * 64: arlarm sensitivity
+* * 32768: ICC communication failure
+* vibration: Detect vibration
+
+# A BIG ThankYOU to my Supporters
+* StefanB from Coburg
+* Hendrik S
+* Karsten B
+* Juergen K
+* FHEM-Wohnung
+* Chrisnitt

controls_mish.txt

@@ -1,2 +1,2 @@
-UPD 2017-07-17_17:26:57 36127 FHEM/71_XiaomiSmartHome.pm
+UPD 2019-04-26_11:40:51 40758 FHEM/71_XiaomiSmartHome.pm
-UPD 2017-07-17_17:01:34 24008 FHEM/71_XiaomiSmartHome_Device.pm
+UPD 2019-03-20_11:32:54 30100 FHEM/71_XiaomiSmartHome_Device.pm